Lazer Tüpleri
there are no products in the cart
Drop Down Menu
Lazer Tüp Montajı
Lazer Yedek Parça
BAYIM OL AYKA MAKINA
W4 Reci Lazer Tüp
Kaliteli Lazer Tüp
Lazer Tüp Fiyatları
Reci Lazer Tüp
Our Products / Reci Laser Tube 10.000 Hours Lifespan / Reci Laser 100W W4 10.000 Hours Lifespan
Skype Me!
Quantity Price Piece(s) Total Price
Total Price

Reci Laser Tube-W Series-W4

 

*Max to 10,000 Hours Life Span

 *Beter Performance

 *Higher Efficiency

 

 TECHNICAL PARAMETERS OF W4  100W

 

Model

Rated Power (w)

Max Power (w)

Lenght (mm)

Diameter

(mm)

Catalyze

Life Span

   (h)

W4

100

120

1400

80

Yes

10.000

 

Installation Requirement

Make sure to follow the operation instructions of model W4 .

The positive pole is in high voltage (the ignition voltage is 24kv).

 

Working Performance

* Cutting function.

* Engraving function: Very good, when the working current is 4mA and the tube is in the state of preionization, the laser can be used for high-frequency impulse engraving.

 

Operation conditions

 Water cooling: using purified water; 3 to 5 liter/minute; water temperature: 10-40.

 The operating environment: temperature 2-40, humidity 10-60%.

 The working current: test current is 29mA. Maximum working current is 30mA. The running current must be kept below 28mA. The life span can reach 10,000hours if the current is kept below 26mA. The ammeter indicating current must be connected to the negative electrode of the laser tube.

 When it is working under over-high current for long term, the negative pole will appear brown yellow, and the life span will be reduced rapidly.

 To protect dust from going into the insulation sheath, please wrap it with plastic film.

 

 
Reci Laser Tube v4
  • Reci Laser Tube v4

    Reci Laser Tube v4

Application Areas
Privacy and Terms of Use   |   Shipping and Handling   |   Delivery and Return    |   Consumer Rights
your e-mail address  
2017 | Lazer Tüplerinde 8 Ay Garanti | All rights reserved.